Use remote to control TV volume and power

On this page

• How to change remote settings
• How to control TV power/volume

If you have the Hubbl Hub and want to control your TV’s volume and power using the Hubbl remote, you’ll need to adjust the remote settings by following the steps below.

Note:Not all TV brands and models are compatible.  

How do I change the remote settings?

You can press 1 and 3 on the Hubbl remote, then press  Continue  and follow the on-screen prompts to allow your Hubbl remote control your TV’s volume and power.

Or, you can:

1. Navigate to  Settings  from the home screen or hold the microphone button and saying “ Settings ”.
2. Select  Connected Devices.
3. Press right so  Remote  is highlighted.
4. Press select on  Control your TV .
5. Follow the on-screen prompts to allow your Hubbl remote control your TV’s volume and power.

Next, you’ll need to ensure  HDMI control  is switched on:

1. In  Settings,  go to  Startup and standby.
2. Scroll to  HDMI control  and check that it's switched on.

How do I control my TV's power/volume with the Hubbl remote?

Once the above steps have been completed, you’ll be able to control your TV’s volume and power using the Hubbl remote.

To turn off Hubbl Hub and the TV,press and hold the standby buttonon the Hubbl remote.

Note:You'll need to ensure there is a clear line of sight between the remote and the Hubbl Hub.