Using the Hubbl remote

On this page

• What are the button functions?
• Is the Hubbl remote ready to use?
• How do I manually pair the remote?
• How do I replace the batteries?
• Control TV volume/power with remote

The Hubbl remote operates both the Hubbl Glass and Hubbl (small device). Colour-matched to the TV, it's available in five colours: Anthracite Black, Ocean Blue, Racing Green, Dusky Pink, Ceramic White.

Note:Coloured remotes are available when purchased with a Hubbl Glass. Hubbl (small device) remotes are only available in Anthracite Black.

What are the button functions of the Hubbl remote?

Refer to the below table to understand what each button on the Hubbl remote does.

Note:If you’re in a third-party app, some of the below buttons won’t be available.

Button	Function
	Puts Hubbl (small device) or Hubbl Glass in or out of Standby mode. Note:To turn off Hubbl (small device) and the TV,press and hold the standby buttonon the Hubbl remote. You'll need to ensure there's a clear line of sight between the remote and the Hubbl device.
	When prompted, press this button to begin your journey.
	Navigate straight to Kayo Sports, BINGE or Netflix content.
	The Quick Settings button displays the text search button and some selected settings.
	Play and pause on-demand content and some live channels ( BINGE , Kayo Sports, Flash and LifeStyle live channels only).
	Turns the Mute function on or off.
	Press up or down to change channels or move up and down the TV Guide or home screen. Press left to rewind and right to fast-forward on-demand content and some live channels. Press the middle button to select the content option highlighted.
	Takes you back to the previous screen
	Takes you to the home screen
	Add content you want to watch later to your Watchlist.
	Press and hold to speak voice commands.
	Turn the volume up or down. Note:If you have the Hubbl (small device) and choose not to connect the remote to your TV, you’ll be unable to use the volume buttons and will need to use your TV remote to adjust volume.
	Enter a channel number using the keypad.

Is the Hubbl remote ready to use?

Yes. During the guided set-up, the remote will automatically attempt to pair via Bluetooth. If unsuccessful, you’ll be asked to manually pair the remote.

If you skip this option, the remote will operate in infrared only. This means you’ll be unable to use certain functions, like the Voice button, until you pair the remote via Bluetooth. You’ll also need to point the remote directly at the device.

Note: The Hubbl remote comes with a paper tab that must be removed before use:

If the tab has torn or was not fully removed, small pieces can be left behind. You can remove the entire back cover of the remote by sliding it down to remove any leftover pieces:

How do I manually pair the Hubbl remote?

You may need to manually pair the remote if it was unable to pair via Bluetooth during set-up.

To do this:

1. Press and hold 1 and 3 together on the remote for three seconds.
2. A message will appear confirming it has connected, select Continue .

If that doesn’t work, follow these steps:

1. Press and hold 7 and 9 together on the remote for three seconds.
2. Press and hold 1 and 3 together for three seconds, and follow the on-screen prompts.

How do I replace the batteries in the remote?

1. Remove the entire back cover of the remote by sliding it down. Make sure to follow the direction of the arrow symbol on the back of the remote:

2. Insert two AAA batteries, ensuring the correct positioning.
3. Slide the back cover back into place and press firmly to close.
4. Press the Home button to launch the home screen.

Can I control my TV volume/power with the Hubbl remote?

Yes. If you have Hubbl (the small device) and want to control your TV’s volume and power using the Hubbl remote, you’ll need to first adjust the remote settings by following the steps here.

You'll also need to ensure there is a clear line of sight between the remote and the Hubbl device.

Note: Not all TV brands and models are compatible.